Resource Digest

Home > FAQ

【FAQ】TAP Fails Running

Dec 04, 2019

If CAPWAP tunnel established and configuration templates downloaded, thin AP will work normally. However, if the parameters are set in configuration templates with wrong values, thin AP will configure incorrectly and it can’t enter normal operation. Check three configuration templates respectively according to the malfunction phenomenon. It also needs to confirm below information:


1. Power supply of TAP is unstable/ off. 

2. Network connection between TAP and WLC is unstable. 

3. Configuration/ Template to TAP is mismatch. 

4. WLC license expires or excesses TAP numbers limitation.

Previous: 【FAQ】UE Unable Accessing Wi-Fi Network

Next: 【FAQ】Why are APs Unable Accessing WLC?